MotoPressor POCKET PUMP V2
Rocky Creek Designs strives to manufacture motorcycle accessories which appeal and are "different", creating a "must have" for motorcyclists all over the world!
Our Pocket Pump has proved to be an efficient “pocket sized” pump since 2013 up until 2023. No changes had to be made to the pump during the 10 years the Pocket Pump has been on the market and we are very proud that this is now a worldwide success.
To continue the success of the pump, we decided to change it up a little, and have “finally” put a cover on it! Because technology has changed quite a lot in the last 10 years, we have also managed to make the pump SMALLER (100*74*37mm) in size and halve the weight of it (345g). It still pumps over 130 psi and will inflate a 150/70 R18 tyre from 0 to 31psi in 3 minutes.
There is a built-in “checking valve” on the pump so you can attach your pressure gauge to the valve and check the tyre pressure at any time.
Comes with a 185mm inflation hose, 2m long power cord with SAE connector, alligator clips with SAE connector and a top quality zippered EVA bag.
NOTE: Some bikes have trickle charger leads that carry a 3A fuse. If you are going to power the pump through the trickle charger lead you will need to replace the 3A fuse with a 15A fuse.
Rocky Creek Designs strives to manufacture motorcycle accessories which appeal and are "different", creating a "must have" for motorcyclists all over the world!
Our Pocket Pump has proved to be an efficient “pocket sized” pump since 2013 up until 2023. No changes had to be made to the pump during the 10 years the Pocket Pump has been on the market and we are very proud that this is now a worldwide success.
To continue the success of the pump, we decided to change it up a little, and have “finally” put a cover on it! Because technology has changed quite a lot in the last 10 years, we have also managed to make the pump SMALLER (100*74*37mm) in size and halve the weight of it (345g). It still pumps over 130 psi and will inflate a 150/70 R18 tyre from 0 to 31psi in 3 minutes.
There is a built-in “checking valve” on the pump so you can attach your pressure gauge to the valve and check the tyre pressure at any time.
Comes with a 185mm inflation hose, 2m long power cord with SAE connector, alligator clips with SAE connector and a top quality zippered EVA bag.
NOTE: Some bikes have trickle charger leads that carry a 3A fuse. If you are going to power the pump through the trickle charger lead you will need to replace the 3A fuse with a 15A fuse.