Note: Because we value your safety and the ability to withstand wear, pressure, or damage over time to your BMW's radiator, you will have to trim a small portion of the black plastic panel that sits above the radiator so that the top two Rad Guard mounting points can be fitted into position.
THIS IS THE ESSENTIAL AFTERMARKET PART!!!
Each Rad Guard comes with its own easy to read fitting instructions. The Rad Guard is bolted onto existing mounting points.
The oil cooler guard is securely hooked over the oil cooler and cable tied to the bottom of the tanks. Cable ties have to be used in this case because there are no solid mounting points under the oil cooler on the bike.
Aircraft grade 6060 T1 –T5 aluminium is used to manufacture our Expanded Mesh & Frames.
The rigid frame of the Rad Guard holds the expanded mesh in place so that hard hits by stones and any other road debris will save your core from certain damage. This rigid frame also acts as a brace to prevent the radiator core from being squashed if a side impact occurs. For example, the bike falls off the stand.
The Expanded Mesh has proven to be the perfect choice of material. It is lightweight and very strong. It does NOT restrict air flow.
The Expanded Mesh sits off your radiator core by approximately 10-15mm, so even a direct hit from a stone, bird or any other road debris will save your radiator core from being damaged.
All Rad Guards come with rubber backing were necessary to alleviate any rubbing or vibration. This has already been installed on the guard.
All Rad Guards come with a 3 Year Transferable Warranty.
Protect your radiator and order your Rad Guard today.
Protect your radiator and order your Rad Guard today. Available as SET.